Consort Claudgen

Electric Heating

Quartz Softstart Control

Softstart	Model No
Heating Control	QSC1

For printable Installation and User Instructions
click here

For current Trade Price List
click here

Please note:
Acrobat Reader is required to view the above
available here

Consort Equipment Products Ltd.,
Thornton Industrial Estate, Milford Haven, Pembrokeshire SA73 2RT, United Kingdom.

For more information please contact us.
Top of page | Home

This QSC1 is specifically designed to control the operation of up to
6 kW of Quartz Heaters. It provides a soft start when initially switching the heaters on, thereby removing the surge normally associated with this type of heater. Cable and switchgear may be selected using the same calculations as for resistive heating loads. This facilitates the use of cheaper and easier to install cable and switchgear.

In order to maximise energy savings the Softstart Driver may be used in conjunction with our PIR1 Heating Control'. The PIR1 is wired in place of the plate switch. In this situation the heating can only come on when there is a physical presence in the area, for a selectable time period, and only when the temperature falls below a predetermined level. Again, the PIR1 can control multiple Softstart Drivers.

Eliminates power on surge

6 kW loading capacity

Reduces installation wiring costs

Prolongs Quartz lamp life

Dimensions (mm):
H:200 D:80 W:150

Weight:
350 g

Softstart Control for Quartz Heating

Softstart Control
for Quartz Heating