Controllers: MRXLC Master Landlord Controller

MRXLC Master Landlord Controller

Consort Claudgen’s RXLC Landlord Control Heating System is an ideal heating system for student accommodation, hotels, or anywhere where a central control unit is required to control the temperature of all heaters in a building or rooms. It consists of an MRXLC controller and one or more CRXLC controllers connected to Consort’s RX heaters.

The MRXLC can control any number of CRXLC depending on the building construction. It sets the same 7-day programme with 6 time settings per day for all CRXLC controllers.

  • Mains powered
  • Controls an unlimited* number of CRXLC controllers
  • Sets the same 7-day programme and time for all CRXLC controllers
  • 2 operating modes:
    • 7-day programme
       – When the temperature on CRXLC controller is adjusted, the new temperature is maintained until the next programme overrides it.
    • Constant temperature
       – When the temperature on CRXLC controller is adjusted, the new temperature is maintained for the landlord set period of up to 4 hours. It then reverts to the fixed temperature.
  • Simple to set up and easy to programme
  • Large backlit LCD display for easy reading
  • Stylish and sleek modern design
  • Option to limit min/max temperature
  • Temperature display of either degrees Celsius or Fahrenheit

* Only limited by building construction.

Energy Saving Features

  • 6 temperature settings per day
  • 7-day heating programmes per week
  • Half heat when approaching target temperature **
  • Maintains temperature within 0.5°C
  • Set temperature in 0.5 degrees increments
  • Reduced power consumption in standby mode

** Half heat feature does not apply to 0.5kW and 0.8kW heaters.

Dimensions & Specifications

Dimensions:

Height (mm) Depth (mm) Width (mm)
89 23 136