SLPBWP Wireless Controller (Waterproof Run-back Timer and Thermostat)
Ideal for outdoors, bathrooms and other wet areas. Suitable for any commercial premises where a heating cycle is required to be operational only when a controller is activated.
The SLPBWP is an IP65 rated waterproof run-back timer and thermostat which allows the heaters to operate only when the controller is activated.
- IP65 rated
- Can operate multiple SL heaters
- 3 operating modes:
Basic: Switches the heater on and off when button is pressed.
Timer: Controller acts as a run-back timer where heating period will be active until run-back timer expires.
Temperature control: Features temperature control for comfort and setback periods. - Choice of 3 total time periods in Timer mode: 15, 30 or 60 minutes
- Comfort heat setting between 15°C to 35°C
- Setback temperatures can be used for frost protection or maintaining a minimum room temperature 0°C to 15°C
- 1 light indicator around the button to show the status of the controller
- Easy operation
- External input available to connect to any voltage free contact such as timers or BMS
- Can be powered by either mains 240V or 12VDC which allows SELV (Separated Extra Low Voltage) installation.
* Power adapter not supplied.
SLPBWP’s Operating Modes
The SLPBWP has one control button, a status indicator and operating modes which are set prior to the controller’s installation.
Basic mode: The controller simply switches the heater on and off when the button is pressed.
Timer mode: It acts as a run-back timer where the heating period will be active until the run-back timer expires.
Temperature Control mode: It features temperature control for comfort and setback periods which can also be used in conjunction with the Timer mode.
SLPBWP Timer Mode with full heating periods:
| Button press x 1 |
| Full Heating period (minutes) |
| 15 |
| 30 |
| 60 |
Dimensions & Specifications
Dimensions:
| Height (mm) | Depth (mm) | Width (mm) |
| 81 | 57 | 83 |
